Nowadays, the home decoration thinks that a variety of chandeliers are usually used to decorate the room for the sake of lighting and design beauty, but it will always be damaged after a long time. It is inevitable that the chandelier will be used for a long time, so let Xiaobian introduce some chandelier maintenance methods and precautions, so that we can repair the chandelier under the premise of safety, no need to ask the special master to come to the door. Fix the chandelier. First, chandelier maintenance method There are only one way to repair the chandelier. When using the chandelier, we may have bad or other problems. We must first consider the root cause of the problem, such as whether there is a short circuit, whether there is a quality problem, etc. First turn off the power before maintenance. If it is convenient, you can pull the switch together to avoid the danger of electric shock when the chandelier is repaired. The ceiling of the living room nowadays many people like to install the crystal chandelier. Be careful when removing it. There are two spring buckles on the back of the chandelier. Be careful to remove it, remove the original chandelier and replace it with a new one. Light up, then the original chandelier is broken, if it is not bright, it is necessary to replace the method. Remove the drive, glue the good drive and power cord tightly with a tape, and then connect the chandelier to the drive. If it is on, the drive is broken. Chandeliers and drivers can be purchased by themselves. Before the chandeliers are repaired, you should first understand the composition of the chandeliers. The power of different lamps is different. The appearance is also large and small. When purchasing, you have their own corresponding power supply. Yudong and chandeliers. There is a fixed interface. In the absence of power failure, the chandelier is bad, not the drive is broken or the lamp itself is harmful, you can take a good drive and chandelier to try, we must use a ladder or stool for maintenance, you can use a screwdriver to hold the screw . It is best to use insulated repair tools so that there is no danger. Always cut off the power and use regular repair tools. If it is a problem with the power cord, draw a power cord. If the bulb has a problem, replace the bulb. If the circuit is unstable, check the circuit. There are many reasons why chandeliers are not cool, so we need to determine which location has a problem before it can be repaired. Second, chandelier maintenance precautions Because the bulb is a sensitive device, it is easy to burn the bulb if it is not anti-static. It is best to wear an anti-static tool such as an electrostatic ring or an electrostatic glove for maintenance. When chandeliers are repaired, it is necessary to prevent continuous high temperatures. The bulbs are generally early enough for LEDs and FPCs. These two parts are not resistant to high temperatures. Continuous high temperatures will cause the FPC cover film to foam, and the LED bulbs will be discarded. Therefore, it is not allowed to operate continuously at high temperatures during maintenance. The true cause of the fault must be identified during repairs. However, many chandeliers fail because there is a short circuit at the foot and must be observed before maintenance. Otherwise, the maintenance of the sloppy, still can not achieve the effect of maintenance. The above is a small series to introduce the chandelier maintenance method analysis and chandelier maintenance precautions, I believe you must understand after reading it! Want to know more exciting home improvement information, please continue to pay attention to the decoration home network. More related wonderful reading: Chandelier maintenance methods, which chandelier maintenance precautions Cigarette Lighter,Electric Lighter,Torch Lighter,Cigar Lighter Wenzhou Xinyu Imp & Exp Co.,Ltd , https://www.somgar.com
