The materials used in the decoration, the most used are the plates, the floor, the furniture, the door, the cabinet, which is the same as the opening plate? But the most used, the problem will be the most. In home decoration, one of the most used decoration materials is the ubiquitous large core board. The large core board can not only make fixed furniture, but also is an essential material for making partitions, door and window covers, and false walls. Since the large core board is generally covered inside after the decoration, the quality of the large core board is difficult for consumers to check. However, the quality of this material is directly related to the quality of the decoration. Therefore, you should not be too light on the big core board. The large core board is still the mainstream in home improvement panels, but there are also other panels available for you to choose from. Glulam: Not easily deformed. This is an emerging solid wood material, which is made of high-quality imported large-diameter logs, which are processed in depth and imaged by fingers. Due to different processes, the environmental performance of this board is superior. It is 1/8 of the amount of formaldehyde allowed in the large core board. The price is about 200 yuan per sheet, which is slightly more expensive than the high-grade large core board. On the other hand, this kind of plate made of solid wood such as American spruce can be directly painted and painted, which saves a process compared with the large core board. Finally, the construction cost may be flat. MDF : The difference between the nail holding force and the particle board is that the natural wood is pulverized into granules and then pressed into a plate, which is the main material of the current cabinet. The MDF is formed by pressing powdered wood chips, and the flatness is good, but the moisture resistance is poor. In contrast, the nail holding force of the MDF is worse than that of the particle board. If the screw is loose after the screw is tightened, it is difficult to fix because the strength of the MDF is not high, so it is rarely used for the cabinet. Facing the three plywood: the cheap and cheap multi-layer board, also known as the three plywood and the plywood, the different layers are called different. According to the thickness of 3 to 9 cm, it can also be called 3 to 9 PCT. Liu Anxin's board price is more expensive than mahogany and poplar. The main use in the home decoration is the veneer plywood, which has already attached a very thin solid wood veneer to the three plywood in the factory. The veneer plywood is easy to use and the price is cheaper than buying a veneer for the construction team. Melamine double-ply board: not afraid of water and fire. This board is sparkling on both sides, very hard, not afraid of water and fire, mainly used in furniture and cabinets. The price is relatively expensive, ranging from 80 yuan to 140 yuan each. Decorative panel: the same manufacturing and wood effect wood veneer is obvious peeling of veneer grade lumber, very thin, the thinnest thickness only 0.3mmî–„ but also 2 ~ 3mm. Common veneer colors range from light to deep, with cherry, maple, white, red, ash, white oak, red oak, teak, rosewood, walnut, white shadow wood, red shadow wood, etc. Variety, the price is not wrong. For large-scale use, it is best to buy the facing three plywood directly. If the panel is used separately for a unique effect, a higher process is required. Crochet Bags,Crochet Market Bag,Crochet Bag Pattern,Handmade Crochet Bags Shandong Guyi Crafts Co.,Ltd , https://www.guyicraft.com