Skin care is a matter of learning. If a man goes out with a thick face cream every day, it will not be popular. Men are easy to face, some people choose to rinse with cold water directly, feel that this can refresh and awaken the skin; some people feel that the skin is too greasy, and like to wash their face with hot water, I feel that this can completely dissolve the oil. In fact, these methods have no way to point out that washing your face with cold water can't dissolve the excess oil on your face. After washing, you will still feel dirty and not refreshed. The use of hot water will excessively remove the oil, making the skin oil and water uneven, and peeling after washing. You should use warm water close to the human body temperature, so that you can completely remove the oil without causing unevenness. After washing your face, many men like to wipe their faces with a towel. In fact, this is also wrong. Because the skin is washed by warm water, it is relatively slack. If you rub your face too hard, it will easily produce facial fine lines. Many women who love beauty usually choose to dry naturally after washing their face, or use the facial tissue to dry out the residual water. Usually men don't have the patience to do this. You can choose to cover the face with a soft cotton towel and press the palm to absorb excess water. . After washing your face, men generally use toner. If it is too troublesome, cover the face with a cold towel to absorb excess water. This can also serve to shrink pores and wake up the sleeping skin. Zero-burden product selection Zero-burden skin care needs to work hard on cleansing products. First, cleansing products should choose foam-rich products. The general facial cleanser is in the form of a lotion. The effective cleansing ingredients are not used. If you apply facial cleanser directly on your face. Massage again, it is easy to form a closed film, not only will not play a cleaning effect, but will block the pores, especially the men's pores are relatively large, the pores are blocked and easy to produce acne. So first put the facial cleanser on the palm of your hand, then rub your hands to the foam, then use your hands to clean the face, so that you can have a good cleansing effect. Niuer (microblogging) teacher once recommended a Japanese method of washing face, using a clean stockings discarded by girls to form a foaming tool, and the facial cleanser is sprayed with enough foam before cleansing. Ordinary boys should not have the patience to do this, and the use of tools will be a waste of cleansing milk, so the two-handed calculation is the easiest way. Zero-burden skin care should choose the right moisturizing product. The moisturizing product should be hydrophilic. Look at the ingredient description. If it is in the first place, the water is generally hydrophilic, compared with the oily product. The skin is also relatively easy to absorb relatively small hydrophilic moisturizing products. If you don't like to use a thick cream, you can choose to spray some refreshing body lotion. Gel-like moisturizing products are also easily absorbed by the face, but the gel The product is easy to form a thin reflective film on the face, so the amount can not be too much when used, and the glare can also reduce the shininess. >>> Correct skin control oil does not go into the wrong area
Silicone Coated PET Film / Si Coated Pet Film
Name Silicone Coated Polyester Film/ Pet Releasing Film & pet release liners/Pet Releasing Liner
1.one side or both sides releasing
2. It can be suitable for releasing liner and adhesive tapes
Property
Test method
Units
Test value
Thickness
ASTM D374
um
36
Tensile strength
MD
ASTM D-882
Mpa
200
TD
160
Elongation at break
MD
ASTM D-882
%
120
TD
133
C.O.F(in/out)
-
-
0.61
Release (silicone weight)
one side
g
80
Heat Shrinkage
302°F(150℃)
30min
%
MD1.5/TD0.5
Glossy@45°
ASTM D2457
%
128
Haze
ASTM D1003
%
2.8
Total Luminous Transmission
ASTM D1003
%
90.0
Transparent Release Film,Silicon Pet Film,Pet Release Film,Pet Releasing Film,Pet Releasing Liner,Si Coated Pet Film Shijiazhuang dadao Packaging materials Co , https://www.ddplasticfilm.com
Material Polyethylene Terephthalate (PET) 100% virgin material
Thickness 23um~250um
Coating One or two sides coating/solvent free or solvent
Colors : Transparent, white, blue, yellow or as customer`s requirement
Base coating Silicone oil
Feature: Good-smoothness and evenly plain
Sample
Free samples are available
Application
Adhesive tape/Label and stickers/MLCC purpose/
electrical industrial products
Usage:
For surface protection during moving,
storage, installation etc
MOQ: 10000 square meter
Package: pallets or as customer`s requirement