When the staff is operating the screen printing machine, it is necessary to select the corresponding care agent according to its material characteristics, and regularly check the operation of the machine, so as to add a proper amount of grease in the unit, so that it can also extend it. Flexibility. In a certain degree, the service life of the screen printing machine is also limited, so when you are dealing with the seal, you need to control the distance between this part and other parts, so it is not suitable for them to produce obvious friction effect, otherwise it is also Will greatly reduce its performance. After each operation of the screen printing machine, the novice must carry out all aspects of the maintenance of the chamber body guard. When it is found that there is obvious defect in this part, the user should replace the new parts in the unit within the first time, and At the same time, if the whole machine is forced to run in the case of defects, then these problems will be expanded over time, and when it is time to repair it, it will waste a lot of time and energy. Users need to establish a sense of protection and implement appropriate maintenance operations to avoid problems. Article source address: http:// Men Belt,Leather Belt,Leather Belt For Men,Belt Buckles LIYONG BAG , https://www.hoyo-bags.com