The morning light point (test) money machine has always been the boss of the industry, like some places with relatively large cash flow, such as banks, supermarkets, companies, etc., then the money counter is indispensable in these places, such as the use of consumption Especially fast. Let me tell you how to make the morning light point (test) the life of the machine is longer? How to make the morning light point (test) the life of the machine is longer? : It mainly consists of a billing rubber wheel and a cash withdrawal counter. The function is that the bill dispensing apron effectively separates the first-ever banknotes from the back banknotes at a line speed twice that of the bill-selling apron, and sends them to the counter and the detecting sensor for counting and discriminating. The banknote leaves the banknote apron and enters the dispensing apron. TD series money counters because the lifting distance between the banknote shaft and the cash withdrawal axis (60mm) is smaller than the width of the banknotes to be counted (maximum 77mm), the remaining width of the banknote will cause relative friction between the banknote apron and the banknote, reducing æ»The life of the banknote apron. The 3EC series of money counters use the method of widening the distance between the banknotes and the banknotes (the distance between the banknotes and the banknotes is 80mm) to avoid this friction phenomenon. Since the distance between the banknote shaft and the banknote shaft is widened, in order to ensure the smooth movement of the banknote from the banknote wheel to the banknote wheel, a pair of wheel is added, and the line speed of the outer edge of the wheel is equal to the outer edge of the banknote ring. The line speed, the line speed of the outer edge of the dispensing apron is twice the speed of the outer edge of the billing apron. When the outer edge of the dispensing apron picks up the banknote, the banknote moves at twice the original speed, thus transferring the wear of the banknote apron to the wheel, and the wheel adopts wear-resistant material. The life of the apron has increased several times. Although the addition of a pair of over-wheels can increase the service life of the coin-removing apron, the problems associated with this are increased cost, complicated structure, and inconvenient maintenance. If the overrunning clutch (commonly known as one-way bearing) is installed on the banknote shaft without adding a pair of over-wheels, the same function can be achieved. The principle is as follows: the one-way bearing is installed in the banknote driving wheel. It can be rotated counterclockwise with respect to the banknote axis. When the banknote is used, the banknote driving wheel rotates clockwise, the one-way bearing does not rotate, and the power is transmitted. When the banknote goes to the dispensing rubber wheel, it moves at twice the original speed, under the drag of the banknote. Due to the action of the one-way bearing, the outer edge of the billing apron moves at the same speed as the banknote, and there is no relative sliding between the banknote and the billing apron, thereby prolonging the service life of the billing apron. The above is the morning light point (test) machine introduced by Xiaobian for readers, hoping to help the readers. Beard Product,Beard Trimmer,Beard Kit,Beard Cream Ningbo Carelax Beauty Products Co.,Ltd. , https://www.carelaxbeauty.com