The company's security system products are mainly used in prisons, airports, and farms.
Our customer service staff 24 will serve you. We have professional drafting staff, product R&D designers. If you have any questions about product design, please contact us immediately.
Security System,Airport Fence,High Security Fence,Hesco Barrier Hebei Giant Metal Technology Co., Ltd. , https://www.hebeigiantmetal.com
Our security system products are of good quality and reasonable price. It is welcomed by many customers.
A number of home-related standards implementations will change home life
In 2018, a number of home-related standards will be implemented, and the home furnishing industry will usher in more scientific and strict regulatory requirements, forcing enterprises to upgrade, bringing momentum to the development of the industry, and safeguarding the rights and interests of consumers in many aspects.
Recoating service standard release
The renovation of old houses will inevitably involve the problem of repainting the paint on walls and Other areas. In 2018, recoating services were subject to standard constraints. In November 2017, China Coatings Industry Association approved the publication of the group standard for indoor wall and wood recoating service and acceptance procedures (T/CNCIA02002-2017). This standard is designed to ensure the quality of indoor wall and wood recoating services, environmental protection meets the requirements, and at the same time ensure that customers' household items are not affected by construction and improve service quality. The standard was officially implemented on January 1, 2018.
This regulation stipulates the terms and definitions, requirements, basic inspection, furniture removal, shelter protection, base layer, materials, construction preparation, construction, removal protection, furniture homing, acceptance, etc. for indoor wall and wood recoating services. Interior wall and wood recoating service.
Technical requirements for furniture products
GB/T3325-2017 "General Technical Conditions for Metal Furniture" approved by the General Administration of Quality Supervision, Inspection and Quarantine and the National Standardization Administration Committee, GB/T3324-2017 "General Technical Conditions for Wood Furniture", GB/T34441-2017 "Soft Furniture Mattresses" Evaluation of Combustion Performance The three national standards for furniture will be implemented on April 1, 2018 and May 1.
Compared with GB/T3325-2008, the main revisions of the new "General Technical Conditions for Metal Furniture" include clarifying the scope of non-applicability, adding provisions for classification, modifying the structure of the standard, and reclassifying the contents of other requirements, respectively. Medium performance, physical and chemical performance and safety performance. The new "General Technical Conditions for Wood Furniture" revised the definition of solid wood furniture and veneer, increased the definition of sheet furniture; revised the product classification, table, cabinet, chair and stool, the main size of the bed; modified formaldehyde release The quantity requirements and test methods increase the VOC limit requirements and test methods, and increase the requirements and test methods for decomposable aromatic amines in leather and textile fabrics. The "Evaluation of Combustion Performance of Upholstered Furniture Mattresses" specifies the terms and definitions, requirements, test equipment facilities, inspection methods and inspection rules for the combustion performance of upholstered furniture mattresses.
More stringent formaldehyde emission requirements
The newly revised national standard GB18580-2017 in May 2017 will be officially implemented on May 1, 2018.
As the only mandatory national standard in the industry, compared with the original standard, the new standard modifies the formaldehyde detection method and its formaldehyde release limit value, and stipulates that the formaldehyde release limit value of the artificial board and its products for interior decoration materials is 0.124 mg/cubic. Meter, the limit mark is E1, canceling the original E2 level. In addition, the new national standard also canceled the formaldehyde release limit value of the dryer method and perforation extraction method in the original standard, and the method for determining the formaldehyde emission amount was unified as “1 cubic meter climate box methodâ€.
Classification or change of redwood species
On December 9, 2017, the National Standardization Administration announced the announcement No. 32 of 2017: The newly revised GB/T18107-2017 "Redwood" will be officially implemented on July 1, 2018, replacing the standard established in 2000. GB/T35475-2017 "Code for the use of mahogany products" will also be implemented at the same time. The "Code for the Use of Redwood Products" specifies the definition and classification of mahogany products, the requirements for tree species, heartwood, materials, moisture content and inspection methods for mahogany products. "Redwood" stipulates the name of the redwood species and the type and characteristics of the wood, and strictly defines the meaning and scope of "redwood".
At present, the texts of the two standards have not yet been officially unveiled. Whether the original 33 species of redwood species will change, and whether the identification of wood will have more detailed regulations is a matter of great concern to the entire mahogany industry.
Plug-in jacks must have a protective door
From April 14, 2017, according to the revised national compulsory standards, companies can only produce products that meet the new national standard. Products manufactured in accordance with GB2099.3-2008 before April 14, 2017 (currently in effect) are allowed to be sold until October 13, 2018. After October 13th, domestic products that meet the new national standard can only be sold.
The new national standard requires that the power strip jack must be equipped with a protective door to prevent electric shock accidents caused by children accidentally touching fingers or metal objects. For extension cords with a rated current of 10A, the minimum cross-sectional area of ​​the conductor is increased from the original 0.75 square millimeter to 1 square millimeter; the rated 16A is increased from 1 square millimeter to 1.5 square millimeter. The fire-resistance performance requirements have been improved, and a needle flame test project has been added. Mandatory requirements must be “CCC certified†and noted on the packaging.
Reverse osmosis water purifier water efficiency rating
In November 2017, the General Administration of Quality Supervision, Inspection and Quarantine and the National Standards Committee officially issued the national standard for the first national mandatory standard GB34914-2017 “Restriction of water efficiency and water efficiency rating of reverse osmosis water purifierâ€. It will be implemented in November 2018.
On the one hand, the standard stipulates the detection and calculation method of water efficiency. On the other hand, the water efficiency is divided into 5 levels, and the red line of the water production rate is set. The limit of 5 is the water efficiency limit of 35%. This means that after the implementation of the new national standard, RO reverse osmosis water purifiers with a net water production rate of less than 35% are considered to be unqualified products. The new national standard will eliminate the high water consumption by setting the water efficiency limit value. low quality product.
This standard defines a red line that strictly controls water efficiency. It is reported that through the setting of the water efficiency limit value, at least 30% of high-water consumption products will be eliminated, and the annual water saving amount is estimated to exceed 100 million cubic meters.
For more information, please pay attention to the official website of Xianghe Furniture City http://