The high and low temperature cycle tester industry is generally made upright, the top is the middle of the fan is the bottom of the sample area is the refrigeration compressor group, the right is the electrical control cabinet and humidification system, the traditional testing instruments are put into a special laboratory or corresponding workshop However, since the environmental test equipment is a precision measuring instrument, it will be placed in a commercial office building or other workshops, which results in a limited size of the high and low temperature cycle tester. If the size of the user's site is limited, the depth is generally no problem, the problem is the height and width. To adapt to the users of different sites, ASLI instruments use a combination of high and low temperature cycle tester design. If the height is not enough, you can The top motor cover and the bottom caster are disassembled (Note: This disassembly and reorganization needs to be carried out by our professional technicians on site. Non-professionals should not handle it by themselves. It is easier to remove the top motor cover. Just loosen the surrounding screws and do not touch it. Do not slip the wire and screw of the motor, but the caster at the bottom needs the customer to prepare the forklift for assistance. Make sure that the personal safety is good. The protection measures for the equipment and personnel should be prepared in advance. If the width is not enough, the cabinet can be installed. Part of the separation from the right control cabinet is on-site assembly. The humidification system is particularly complicated. However, it is worth noting that even the detachable high and low temperature cycle tester needs to be based on the internal volume and actual size of the test chamber. Customizable, and not any size can enter smoothly. Nose Hair Trimmer,Trimming Hair Machine,Nose Hair Trimmer Household,Protable Nose Hair Tool ZHEJIANG SHENGFA ELECTRIC APPLIAMNCES CO.,LTD , https://www.cn-shengfa.com