Solid wood flooring has the advantages of good elasticity, warmth and comfort, giving people a sense of returning to nature, so it is favored by consumers. However, during the use of solid wood flooring, such as improper selection and laying, there will be some "common diseases" such as insects, quilting, squeaking, dirty boards, painted faces, drums and lifting, etc. Talk about the method of diagnosis and treatment: Insects: Because of the biting of insects in the wood, it is often troublesome to see a pile of powder on the floor surface. The reason is related to the selection of flooring. In order to prevent insects, the first is to purchase the floor produced by the dry kiln steaming process. Although the price is relatively expensive, all the eggs in the wood have been killed. Second, the keel is carefully selected, and there are insects or bark. , no need to. Quilting: Some floors are laid for a few days, and there are large gaps between the slats. Most of this is related to the high moisture content before the floor is laid, and it shrinks due to high temperature or air drying in the room. Note that the moisture content before laying the floor should be in the range of 8%-13%, and oil should be applied in time after the paving. Loud: Because the quality of the floor is not high, people will make a loud noise when they walk on it. It is very uncomfortable after hearing. To this end, it is necessary to pay attention to the solid connection between the keel and the ground, the floor and the keel, and the number and length of the nails are appropriate. At the same time, it is necessary to prevent the keel spacing from being too large or the water content to be too high, otherwise the drying and shrinking looseness after laying will also have a certain impact. Dirty board: refers to the fact that some floors are painted, giving people an unclean "grey" feeling, and some even the footprints are clearly visible. To avoid this, it is important to keep the surface of the board clean before polishing. Painted face: Using the slats of the same tree species, the color will also have a big difference. If it is not properly laid, it will be easy to present a "flower face." When using varnish wood floor, especially for tree slats with great chromatic aberration, you should consider the selection and deployment of slats, so that the color of the floor is from shallow to deep, or gradually transition from deep to shallow. Drumming: Some floors are bulged after the paving, and the drums appear. This is mostly related to the environment around the floor, especially the foundation too much tide or floor water. In order to ensure that the floor can not be drum, pay attention to three points: First, the civil engineering floor can not immediately lay solid wood flooring; Second, if the living room is in a humid environment, it is appropriate to lay a moisture-proof floor; Third, when laying, the floor The water content cannot be lower than 6%. Lifting: This is mainly because the solid wood floor is not caused by the regular drying process. Therefore, a plastic film can be laid under the floor during installation to prevent moisture and prevent the floor from lifting, and on the other hand, it has a certain sound insulation effect. In addition, the floor is placed in the room to be laid two or three days in advance, so that the wood can adapt to the indoor temperature and can also prevent the warp. Offer Hair Clipper Or Trimmer,Hair Clippers For Men,Hair Trimmer For Women From China Manufacturer Hair Clipper Or Trimmer,Hair Clippers For Men,Hair Trimmer For Women,Electric Hair Clippers Ningbo Unibono Appliance Co.,Ltd , https://www.unibono.com