[ Chinese wardrobe net ] Wardrobe is an indispensable piece of furniture for every household. The maintenance of the wardrobe is also one of the problems that cannot be ignored. Maintenance is not good and will be implicated in every corner of the cabinet. Whether it is the surface of the cabinet or small to hardware, it is necessary to pay attention to cleaning and maintenance, so that the overall wardrobe will last longer. Today, Fendi Xiaobian shared with you the small coups and attention points about the maintenance of the wardrobe. First, the wardrobe to dust tools Pay attention to the cleaning and maintenance of the surface of the wardrobe. There should be no debris or dust in the track. When cleaning, use a semi-wet rag to wipe the cabinet and cabinet door. Never use corrosive detergent. The dust of the track can be cleaned with a vacuum cleaner or a small brush, and the metal parts such as the frame and the tie rod are wiped with a dry cloth. When cleaning, do not touch the cleaning tool to avoid the hard object scratches. Prevent heavy objects and sharp objects from hitting the track, cabinet and door panel. The cabinet body should not touch water and other liquid solvents to avoid the edge from falling off. . When there is dust on the surface of the wardrobe, use a donkey or a soft cloth to remove dust. If the surface is stained, consider using a proper amount of neutral detergent or soapy water to wipe with a damp cloth, or use a wax to remove it. Never use a corrosive detergent. Second, the hardware can not be ignored The joints of the closet should be inspected regularly and found to be tightened in time after loosening and a small amount of lubricating oil is injected. If the malfunction occurs due to disassembly and assembly, the wardrobe should be notified in time to assist the dealer. Metal parts such as cabinets and tie rods should be wiped with a soft cloth. Do not use chemical cleaners or acidic liquids. It is normal for the light rail door pulley to be used for a long time. To ensure the smooth and quiet sound of the pulley, please add some lubricating oil along the upper and lower pulleys every 2-3 months. When using the sliding door, be sure to check whether the handle is protruding. If there is a protrusion, press it first, otherwise it will damage the side cabinet or handle. Third, the indoor environment should be ventilated Keep the indoors ventilated and dry. Frequently keeping indoor ventilation, the indoor humid air can be exchanged with the outdoor, and the chemical substances in the wooden wardrobe can be volatilized as far as possible to the outside. It is common practice to open windows or doors frequently to make air convection or Air conditioning system and ventilation system are adopted. Avoid direct sunlight. Outdoor sun exposure should be avoided as far as possible for the whole or part of the wardrobe. It should be placed in a place where it can escape from the sun, or be separated by direct sunlight. Fourth, the wardrobe should be placed smoothly The wardrobe should be placed smoothly to ensure the use of the wardrobe and to prevent damage to the wardrobe structure. If the wardrobe is placed, it is often in a state of shaking and unstable, and the fastener will be loosened for a long time. The joint part or the connecting piece is loosened, and the bonding part is cracked, which affects the service life of the wardrobe. If the ground is not flat, be sure to lay the bottom of the wardrobe.
The right caulking gun for you depends on the type of caulk you will be applying, as well as the overall scope of your project. Ahead, get our top tips and recommendations on choosing the best caulking gun for your needs and budget, and don`t miss our top picks, below!
Heavy Duty Sealant Gun,Heavy Duty Silicone Gun,Silicone Gun Heavy Duty,Silicone Filler Gun jiangsu concentric internatinal ltd , https://www.jsconcentriccorps.com