Bagasse Pulp Container bring environmental protection and convenience to our lives. The use of bagasse containers can reduce the use of Plastic Container because bagasse containers are made from the renewable resource bagasse and have lower carbon emissions and environmental impact. Such containers can be biodegradable after use and have less impact on the environment.
Reduce carbon emissions: The production process of bagasse containers can effectively reduce carbon dioxide emissions. Sugar cane, as a product of photosynthesis, can absorb a large amount of carbon dioxide, making the carbon emissions in the production process low.
1 The following are the reasons for the general paper feeding
1) The height of the paper pressure plate at the front of the paper feed platen is not suitable for adjustment. Should generally be three sheets of printing paper thickness.
2) The gap between the paper feed roller and the feed roller is not properly adjusted between the paper feed head and the paper feed platen. In general, paper with a width of less than 5.5 mm for printing paper passes through two or three, and paper with a width exceeding 5.5 mm passes through three or four. In addition, the photoelectric double-sheet controller does not adjust to the position and it also causes double sheets and multiple sheets to enter the drum.
3) In the normal operation of the printing machine, if the paper arrives before the regulation is earlier, later, skewed, missing corners, or curled, the photoelectric detection immediately orders the front gauge to stop swinging to prevent the paper from entering the drum again. At the same time, the swinging feed paper teeth do not pick up the paper, the machine decelerates, the roller presses off, the printing plate rollers lift up, the water transfer roller and the ink roller stop swinging. At this time, if the electrical control circuit fails, it is easy to roll a stack of paper between the impression cylinder and the blanket cylinder, resulting in a stuffy car.
4) The paper feeding operator is absent from the work position. When the paper feeding is abnormal, it is not processed in time. This is the most common reason for the paper feed stuffy car.
5) Because the pile of paper is uneven, objects such as cork blocks and paper strips used for filling paper piles under the piles of paper piles are not processed in time, and may also be transported to the front gauges along with the papers and rolled into the rollers, resulting in boring cars.
6) The paper feeding head and related parts are not adjusted properly, the paper feeding is abnormal, and boring cars are also prone to occur.
7) If it is a coated paper printing, because of the large amount of ink used for printing, it is easy to cause adhesion, and the operator does not do the paper-through processing when the paper is fed at the feeder, it may cause a bunch of adhesive paper to be rolled into the machine drum. Boring car.
2 offset printing machine feed paper fault processing
1) If there is a small amount of paper to be rolled in, it should be solved in a rolling way as much as possible.
2) If there are more papers to be rolled in, only the method of cutting out the pressure-reducing material of the pressure-compressed area, rolling in paper, and blankets may be used. The blankets and all the excess paper are first torn off and clean, leaving a pressed area in the pressure area. Use a screwdriver to cut away the paper and blanket in the area where the pressure has been applied. Be careful not to cut the surface of the impression cylinder and the blanket cylinder. Then use a screwdriver to remove the paper.
In the production practice, most of the paper-feeding and sedulous accidents are caused by humans. The main reason is that the operators are not responsible, work sloppyly, and are away from their jobs. Therefore, they must strengthen management and enhance the responsibilities of operators in their work. It may avoid the occurrence of human traffic accidents.
There are also some benefits to using bagasse containers for your takeout:
1. Bagasse pulp container has good thermal insulation performance, which can maintain the temperature and taste of food.
2. This kind of container is strong and durable, not easy to deform, and can effectively protect the integrity of food.
3. Bagasse food container also have the characteristics of high transparency and good texture, making take-out food more beautiful and delicious.
Bagasse Pulp Bowl,Bagasse Pulp Plate,Eco Friendly Pulp Plate,Bagasse Bowl
EVER GREEN(ZHEJIANG)NEW MATERIAL CO., LTD / KUNSHAN GREENPACK CO.,LTD , https://www.jiaxingevergreen.com