[ China Wardrobe ] If you choose a custom closet at home, you need to grasp the following basic principles in order to have a highly feasible and efficient process: First, the principle of synchronization. That is, the product's parts are oriented in the general direction of the product, and the small direction is based on the number of single-piece packages of the product. The parts are controlled as much as possible or at the same time as possible to achieve the packaging process, avoiding the phenomenon of packaging. The central content inside is actually the work item in the process flow sheet. The working hours of each component of the product should be clear, accurate, and operability, and the comprehensive factors should be fully considered. Second, the principle of downstream. Try to avoid the backflow of product parts on the production line. The reverse flow will block the normal process of other parts, just like the traffic flow on the road, making the whole workshop process disorder, which is not conducive to the management of the manager. The content is the order of the operations in the process flow sheet. The difficulty is how to solve the contradiction between the cross-operation and the synchronous arrival of the production process of each component. Third, the principle of sufficiency. It is the waste of the process itself that is avoided in each process. For example, the cutting process can be used to open three plates at a time, and design them into two plates. Another example is that the hole on the board can be finished twice, and you design it to be finished three or four times, which will waste the process itself. Therefore, the processing efficiency is affected. To do this, the first point is that the corresponding process documents should be comprehensive, that is, the opening process should have a drawing plan, and the sawing sequence should be prepared. The drilling process must have a drilling pattern, and Different types of row drills have different optimized drilling schemes, and they must be combined with man-hours for handling. Fourth, the quality principle. Any process can not be at the expense of product quality when improving efficiency, because product quality is the life of the product, and mass production can be maximized under the premise of quality. Fifth, the principle of gradual progress. A good process design is just the beginning of a better and better process design. Process design itself is a process of continuous exploration and continuous improvement in practice. Only better is not the best. PVC Hoarding Board ZHEJIANG DEQING GONAT FENCE CO.,LTD , https://www.gonatpvcfence.com