Mouse lectin (PHA) enzyme-linked immunoassay (ELISA)

Mouse Lectin (PHA) Enzyme Linked Immunoassay (ELISA) Kit Instructions for Use This kit is for research use only.
Drug Name:
Common name: Mouse lectin (PHA) enzyme-linked immunoassay kit Purpose of use:
This kit is used to determine the content of lectin (PHA) in mouse serum, plasma, or other related tissue fluids.
Experimental principle This kit uses the double antibody sandwich method to determine the level of mouse lectin (PHA) in the specimen. Microporous plates were coated with purified mouse anti-agglutinin (PHA) antibody to make solid-phase antibodies, and then lectin (PHA) was added to the monoclonal antibody-coated microwells, followed by HRP-labeled lectin (PHA) The antibody binds to form an antibody-antigen-enzyme-labeled antibody complex. After thorough washing, the substrate TMB is added for color development. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid. The color depth is positively correlated with the lectin (PHA) in the sample. The absorbance (OD value) was measured with a microplate reader at a wavelength of 450 nm, and the content of mouse lectin (PHA) in the sample was calculated by a standard curve.
Kit composition
1. 20 times concentrated washing solution 30ml × 1 bottle 7 stop solution 6ml × 1 bottle
2. Enzyme label reagent 6ml × 1 bottle 8 standard (27ng / L) 0.5ml × 1 bottle
3. Enzyme-coated plate 12 wells × 8 strips 9 standard dilutions 1.5ml × 1 bottle
4. Sample diluent 6ml × 1 bottle 10 instructions 1 copy
5. Developer A solution 6ml × 1 bottle 11 sealing film 2 sheets
6. Processing agent B solution 6ml × 1 / bottle 12 sealed bag 1 specimen processing and requirements
1. Serum, plasma, cerebrospinal fluid, and abdominal cavity fluid samples can be directly measured;
2. The samples containing NaN3 cannot be detected because NaN3 inhibits horseradish peroxidase (HRP) activity.
3. Experiment as soon as possible after collection. If the experiment cannot be performed immediately, the specimen can be stored at -20 ° C, but repeated freezing and thawing should be avoided.
Steps
1. Dilution and loading of standard products: set 10 standard wells on the enzyme-coated plate, add 100 μl of the standard products to the first and second wells, and then add the standard dilution solution to the first and second wells. 50μl, mix well; then add 100μl to the third and fourth wells respectively, and then add 50μl of standard dilution solution to the third and fourth wells respectively, mix well, and then each in the third and fourth wells Take 50μl and discard; add 50μl to the fifth and sixth wells respectively, and then add 50ul of the standard dilution solution to the fifth and sixth wells respectively, mix well Take 50μl of each in the seventh and eighth wells, and then add 50μl of the standard dilution solution in the seventh and eighth wells respectively. After mixing, take 50μl from the seventh and eighth wells to the ninth. 5. In the tenth well, add 50μl of standard dilution solution to the ninth and tenth wells respectively. After mixing, take 50μl from the ninth and tenth wells and discard. (After dilution, the volume of each well is 50μl, and the concentration is 18μg / L, 12μg / L, 6μg / L, 3μg / L, 1.5μg / L respectively).
2. Sample addition: set up blank wells (the blank control wells do not add samples and enzyme reagents, the rest of the steps are the same) and the sample wells to be tested. Add 40μl of sample diluent to the test sample well of the enzyme-coated plate, and then add 10μl of the test sample (the final dilution of the sample is 5 times). Add the sample and add the sample to the bottom of the well of the microplate, try not to touch the wall of the well, shake gently to mix.
3. Incubation: Seal the plate with a sealing film and incubate at 37 ° C for 30 minutes.
4. Mixing solution: Dilute 20 times concentrated washing solution with distilled water 20 times and reserve
5. Washing: Carefully peel off the sealing film, discard the liquid, spin dry, fill each well with the washing solution, let it stand for 30 seconds and discard, repeat 5 times, pat dry.
6. Enzyme addition: Add 50μl of enzyme label reagent to each well, except for blank wells.
7. Incubation: The operation is the same as 3.
8. Washing: The operation is the same as 5.
9. Color development: Add 50μl of developer A to each well, then add 50μl of developer B, mix gently, and develop at 37 ° C in the dark for 15 minutes.
10. Stop: add 50μl of stop solution to each well to stop the reaction (at this time, the blue color turns to yellow).
11. Measurement: The absorbance (OD value) of each well was measured in sequence with the blank air conditioner at zero and 450 nm wavelength. The measurement should be carried out within 15 minutes after adding the stop solution.
Calculate the concentration of the standard as the abscissa, and the OD value as the ordinate. Draw a standard curve on the coordinate paper, and find the corresponding concentration from the standard curve according to the OD value of the sample; multiply by the dilution factor; The linear regression equation of the standard curve is calculated from the concentration and the OD value, the OD value of the sample is substituted into the equation, the sample concentration is calculated, and then multiplied by the dilution factor, which is the actual concentration of the sample.
Precautions
1. The kit should be taken out of the refrigerated environment and equilibrated at room temperature for 15-30 minutes before use. If the enzyme-coated plate is unsealed after opening, the strip should be stored in a sealed bag.
2. Crystals may be precipitated in the concentrated washing liquid, which can be heated and dissolved in a water bath during dilution, and the results will not be affected during washing.
3. The sampler should be used at each step of sample addition, and the accuracy should be regularly checked to avoid test errors. It is best to control the sampling time within 5 minutes. If there are many specimens, it is recommended to use a volley gun to add samples.
4. Please make a standard curve at the same time of each measurement, it is best to make a double hole. If the content of the substance to be tested in the specimen is too high (the OD value of the sample is greater than the OD value of the first well of the standard well), please dilute it with a certain multiple (n times) of the sample diluent and then determine it. Multiple (× n × 5).
5. The sealing film is limited to one-time use to avoid cross-contamination.
6. Please keep the substrate away from light.
7. Strictly follow the instructions, and the test results must be determined by the microplate reader.
8. All samples, washing liquids and various wastes should be treated as infectious agents.
9. The components of different batches of this reagent shall not be mixed.
10. If there is any difference with the English manual, the English manual shall prevail.
examination range:
1μg / L -20μg / L
specification:
96 servings / box storage conditions and expiration date
1. Kit storage :; 2-8 ℃.
2. Validity: 6 months

Oven Control Panel Glass

Professional customized oven control panel, products and services are of good quality, cost-effective, and save you purchase costs. We are a professional manufacturer of dotted glass to meet the glass customization needs of thousands of dotted products. We strictly follow various systems for production, and win customers' affirmation through highly competitive prices, excellent quality, timely delivery time, and perfect after-sales service system. We specialize in the production of glass, as well as Tempered Glass for microwave ovens, ovens and other household appliances. Through continuous development, we have a deep processing foundation and strong technical capabilities. The company is equipped with advanced glass production lines, superb technicians, and senior art cutting experts to achieve a perfect pursuit for your products. we areChina Glass Door For Microwave Oven ,Tempered Glass Sheet supplier & manufacturer, offer low price, high quality Oven Door Tempered Glass ,Tempered Oven Glass, etc.