What aspects of the shaking incubator need maintenance

Maintenance of shaking incubator:

1. Accurately use and pay attention to the maintenance of the instrument so that it is in good working condition, which can extend the service life of the instrument.

2. During the continuous working period of the instrument, periodic inspections should be done every three months; check the fuses, control components and fastening screws, and whether there are water drops, dirt, etc. falling on the motor and control components.

3. The bearings of the transmission part have been filled with a proper amount of grease (No. 1 calcium-naki) before leaving the factory. The instrument should be filled with grease every six months during the continuous working period. / 3.

4. The instrument is often used, and natural wear is normal. After the instrument is used for one year, if abnormal noise is found in the motor and compressor; the bearing of the transmission part is worn, the belt is loose or cracked, and the electronic control component fails, the company will continue to provide quality services and assist in handling.

5. The compressor should avoid continuous starting.

Empty Eyeshadow Case

We have many different kinds of empty eyeshadow case.

We promise out standing service tailored to meet your demands. Our products are favored by many customers all over the world and are sold in Europe, North America, South America and Asia.
We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional Square Cosmetic Compact with good services for you!

Empty Eyeshadow Container,Plastic Eyeshadow Case,Empty Eyeshadow Packaging,Empty Eyeshadow Case

ims Packaging Limited , https://www.ims-cosmetic-packaging.com